A wide selection of filter cartridge styles, material selections
and porosities to satisfy almost any filtration application in
the metal finishing and electronics industries. They can be used
with SERFILCO filter chambers and systems or as replacements for
other single or multiple cartridge housings.
DEPTH WOUND FILTER CARTRIDGES
MAXI-DEPTH, MAXI-WIND, HI-PERF, PUREFYBE
and VALUWOUND filter cartridges offer true depth filtration. Wound
cartridges are manufactured to provide selective particle retention
throughout the media's depth which translates to high solids retention
and longer service life with relatively low pressure drop. For
nominal particle retention of .5 to 100 micron. Wound of cotton,
polypropylene or mod-acrylic. Consult Application Engineering
Department for glass, nylon, Orlon® and other fibers.
MELT BONDED FILTER CARTRIDGES
POLYSPUN melt bonded filter cartridges are
manufactured from continuous fibers thermally bonded and spun
over a heated mandrel. Controlled graded density construction
provides true depth filtration. These cartridges are free of resins,
lubricants and anti-static agents; they are non-migrating and
suitable for high purity applications.
PLEATED FILTER CARTRIDGES
POLYSERF pleated filter cartridges are manufactured
of continuous polypropylene microfibers self-bonded by a unique
process that controls media uniformity and density. They provide
large surface area for efficient particle removal with very low
pressure drops. These cartridges are also free of resins, binders
or surfactants for high purity applications. For nominal or absolute
particle retention of .1 to 100 micron. Available double open
end or with 222 "O"-ring seal.
CLEANABLE SURFACE
For use with filter aid or filter aid with
carbon. Permits backwashing of chamber. May be individually cleaned
and reused. Constructed of pleated polypropylene, wire mesh, sintered
metal, ceramic or polypropylene sleeve.
SLEEVE-TYPE FILTER CARTRIDGES
Sleeve-type filter cartridges
may be used uncoated or precoated with filter aid. Sleeve cartridges
are interchangeable with any regular cartridge of corresponding
length. Sleeves don't have the solids holding capacity of cartridges,
so they require frequent cleaning. However, this makes sleeves
re-usable for economical operation and, therefore, minimizes disposal
costs.
CARBON
For adsorption of soluble impurities when
using powdered or granular cartridges or refillable canisters
for granular carbon.